Summary of common faults of air compressors

Today, air compressors have basically become an indispensable machine for industrial manufacturing

Summary of common faults of air compressors

Today, air compressors have basically become an indispensable machine for industrial manufacturing. Each enterprise has set the configuration, the pipeline structure will actually be different, and the mechanism of the air compressor station also has its own characteristics. Today, Maines Air Compressor will take you to talk about the characteristics of the air pressure station. These characteristics are exactly the problem. It has been bothering the managers of the air pressure station.

1. Noise

Speaking of noise, it’s a real headache. This noise is different from other energy conversion equipment. The entire air compressor station was shrouded in noise. However, these noises are unavoidable and difficult to eliminate. These noises contain a lot of high-frequency components, which can easily damage the health of workers. Usually, wall design defects or inadequate shock absorption measures can easily make the air compressor station a noise source.

Second, oil pollution

When the air compressor is running at high speed, it needs to be lubricated with oil, and at the same time, the high-temperature compressed air generated also needs oil to reduce the temperature. Once the air compressor is damaged, the smell of oil can fill the air compressor station. If maintenance personnel randomly discard oil-containing equipment, it will pollute the environment. Therefore, a strict system is needed to regulate this behavior.
Third, the environment is poor

As we all know, the environment of the air compressor station is very poor. Usually the air compressor station is located in a relatively closed corner. Due to the poor ventilation and the high humidity around the air compressor, the working efficiency of the air compressor will be reduced. In view of this, the editor recommends changing the good environment of the air compressor station to greatly improve the working efficiency of the air compressor.

Fourth, the old equipment is running with illness

Many air compressor stations have this problem, the equipment has been running for a long time, maintained in place and in good operating condition. Conversely, if the equipment is lack of maintenance, the unit may fail at any time. Therefore, it is necessary to pay attention to the life cycle of the air compressor and do a good job in the daily maintenance of the unit.

5. The technology of post-processing equipment is backward

The compressed air produced by the air compressor must be dried and degreasing before it can be used. Taking dryers as an example, there are many types and uneven quality. Adsorption dryers include: no-heat regeneration, micro-heat regeneration, thermal regeneration, blast heating, compression heat utilization, etc. Some post-processing equipment needs to consume a lot of compressed air for regeneration, and there is a lot of waste in this process. This is a technology that has been eliminated. Outdated technology has an extremely serious impact on the efficiency of the entire air compressor station